AGMATE
SUBSOILER POINT BOOTED KMC
SKU: 972-34800
1-1/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 13/16" for 3/4" wide shank. Will replace KMC 16-080-075
In stock, 46 units
1-1/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 13/16" for 3/4" wide shank. Will replace KMC 16-080-075
Sale price$27.63
FNB c/o DURAMAX INDUSTRIES
RIPPER POINT FOR KMC/UNVERFERTH
SKU: 972-69547KU
Has oblong mounting hole for dual applications, KMC and Unverferth. 1-3/8 inch square base and narrow boot for 3/4 inch shank, wear cap and fin. Will replace KMC 16-080-282.
In stock, 331 units
Has oblong mounting hole for dual applications, KMC and Unverferth. 1-3/8 inch square base and narrow boot for 3/4 inch shank, wear cap and fin. Will replace KMC 16-080-282.
Sale price$41.80
Agrituf
AGRITUF WEAR SHIN FOR KMC AND UNVERFERTH 3/4 INCH SHANK
SKU: ATRSSU
In stock, 292 units
Sale price$41.41
Agrituf
AGRITUF RIPPER POINT WITH FIN FOR KMC AND UNVERFERTH
SKU: ATRSPU
Fits Unverferth:410, 430, 432 Ripper-Bedder610, 630, 632 Ripper-Roller310, 312, 330, 332 Ripper Stripper Strip Till SubsoilerReplaces OEM # 67385, 67951B
Sold out
Fits Unverferth:410, 430, 432 Ripper-Bedder610, 630, 632 Ripper-Roller310, 312, 330, 332 Ripper Stripper Strip Till SubsoilerReplaces OEM # 67385, 67951B
Sale price$77.81
AGMATE
SUBSOILER POINT 1-1/4"X1-3/4"X11" BOOTED KMC
SKU: 972-15483
1-3/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 1-1/16" for 1" wide shank. Will replace KMC 16-080-096.
Sold out
1-3/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 1-1/16" for 1" wide shank. Will replace KMC 16-080-096.
Sale price$33.84
G L HUYETT INC
3/8 X 2 INCH ROLL PIN
SKU: 444-RP38X2
Used on 41B2512JD and other ripper points.
In stock, 697 units
Used on 41B2512JD and other ripper points.
Sale price$0.83
FNB c/o COLOMBIA EXPORTS LTD
WEAR SHIN FOR KMC
SKU: 972-KMC100
Will replace KMC 17-057-004. 5/16 inch x 1-3/8 inch spirol pin (3) required KMC 17-050-022
Sold out
Will replace KMC 17-057-004. 5/16 inch x 1-3/8 inch spirol pin (3) required KMC 17-050-022
Sale price$14.24
WIESE INDUSTRIES
SUBSOILER POINT FOR JOHN DEERE
SKU: 972-412512JD
Subsoiler Point produced from high carbon steel and heat-treated. Made in the USA Bolt-on - 1 x 2 1/2 x 12
In stock, 6 units
Subsoiler Point produced from high carbon steel and heat-treated. Made in the USA Bolt-on - 1 x 2 1/2 x 12
Sale price$38.55
WIESE INDUSTRIES
SUBSOILER POINT CAPPED FOR JD
SKU: 972-412013JDC
Subsoiler Point produced from high carbon steel and heat-treated. With high chrome cap installed. High chrome will outwear plain by up to 10 times. Made in the USA Bolt-on - 1 x 2 x 13 - Capped
Sold out
Subsoiler Point produced from high carbon steel and heat-treated. With high chrome cap installed. High chrome will outwear plain by up to 10 times. Made in the USA Bolt-on - 1 x 2 x 13 - Capped
Sale price$57.72
WIESE INDUSTRIES
SUBSOILER POINT FOR JOHN DEERE
SKU: 972-412013JD
Subsoiler Point produced from high carbon steel and heat-treated. Made in the USA Bolt-on - 1 x 2 x 13. Uses 1/2" plow bolt.
Only 4 units left
Subsoiler Point produced from high carbon steel and heat-treated. Made in the USA Bolt-on - 1 x 2 x 13. Uses 1/2" plow bolt.
Sale price$33.74